Yamaha Wave Raider 701-760 / Wave Runner 701-760 Steering Nozzle Extension +50mm NAM Performance

Upgrade the steering response of your Yamaha WaveRaider or WaveRunner with the all-new NAM Performance +50mm Clamp-On Steering Nozzle Extension.

This is a clamp-on extension that installs over the outlet of your stock steering nozzle. It does not replace the complete steering nozzle. The extension is held securely in place using the included stainless-steel clamp, allowing for a simple installation without removing the factory pivot hardware or steering linkage.

The +50mm extended design provides a quicker, sharper, and more aggressive steering response with less range of motion required at the handlebars. It is an excellent upgrade for riders looking for improved carving, tighter turns, and a more responsive handling feel.

Each NAM Performance nozzle extension is made to order from PolyMax™ PETG for strength, durability, and reliability around water. Every extension is designed and manufactured by NAM Performance in Upstate New York.

KEY FEATURES

• +50mm clamp-on steering nozzle extension
• Fits over the factory steering nozzle
• Quicker and sharper steering response
• Helps reduce the watercraft’s turning radius
• Less handlebar movement required while turning
• No replacement steering nozzle required
• No longer ball-joint stud required
• No changes to the factory pivot mounting hardware
• Stainless-steel clamp included
• Lightweight and removable design
• Made from durable PolyMax™ PETG
• Made to order
• Designed and manufactured in Upstate New York

PRIMARY FITMENT

Designed for compatible stock-style steering nozzles found on:

• Yamaha WaveRaider 700 / 701
• Yamaha WaveRaider Deluxe 700 / 701
• Yamaha WaveRaider 760
• Yamaha WaveRunner 701
• Yamaha WaveRunner 760
Please contact NAM Performance with your watercraft’s model, year, and a clear photo of the stock steering nozzle if you are unsure about compatibility.

Models equipped with a reverse bucket, trim ring, or other hardware positioned directly behind the steering nozzle may require additional clearance verification.

WHAT IS INCLUDED

• One NAM Performance +50mm clamp-on steering nozzle extension
• One stainless-steel mounting clamp

The factory steering nozzle, jet pump, watercraft, and any other components shown in the listing photos are not included.

INSTALLATION

Inspect and clean the outside of the factory steering nozzle.
Slide the NAM Performance extension completely over the factory nozzle outlet.
Position the stainless-steel clamp inside the recessed clamp channel.
Confirm that the extension is straight, fully seated, and does not interfere with the steering, trim, or reverse components.
Tighten the clamp evenly until the extension is firmly secured.
Turn the handlebars fully in both directions and verify that the steering system moves freely before operating the watercraft.

Inspect the extension and clamp before every ride. Recheck the clamp after the first ride and periodically throughout the season.

IMPORTANT SAFETY INFORMATION

This is an aftermarket performance product. Proper installation and inspection are the responsibility of the purchaser and operator.

Do not operate the watercraft if the extension is loose, damaged, cracked, improperly positioned, or interfering with the steering system. Always verify full steering movement before launching the watercraft.

Made to order by NAM Performance in Upstate New York.